List of Contributors

Isao Aritome

Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC 27708, USA

Omar Azzaroni

Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Universidad Nacional de La Plata, CONICET, CC. 16 Suc. 4, 1900 La Plata, Argentina

Edmondo M. Benetti

Laboratory for Surface Science and Technology, Department of Materials, ETH Zurich, Vladimir-Prelog-Weg 5, 8093-CH Zurich, Switzerland

K. Binder

Institute für Physik, Johannes Gutenberg-Universität Mainz, Staudinger Weg 9, D-55099 Mainz, Germany

Eva Bittrich

Leibniz-Institut für Polymerforschung Dresden e.V., 01069 Dresden, Germany

O. V. Borisov

Institute of Macromolecular Compounds RAS, Saint Petersburg, 199004, Russian Federation

ITMO University, Saint Petersburg, 197101, Russian Federation

Institut des Sciences Analytiques et de Physico-Chimie pour l'Environnement et les Matériaus (IPREM), UMR 5254 CNRS UPPA, 64053 Pau, France

Tuncer Caykara

Department of Chemistry, Faculty of Science, Gazi University, 06500 Besevler, Ankara, Turkey

M. Lorena Cortez

Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Universidad Nacional de La Plata, CONICET, CC. 16 Suc. 4, 1900 La Plata, Argentina

Ali Dirani

Université catholique de Louvain, Institute of Condensed Matter and Nanoscience, Bio & Soft Matter, Louvain-la-Neuve, Belgium

Gisela Díaz

Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Universidad Nacional de La Plata, CONICET, CC. 16 Suc. 4, 1900 La Plata, Argentina

Jakub Dostalek

Biosensor Technologies, AIT - Austrian Institute of Technology GmbH, Muthgasse 11, Vienna 1190, Austria

S.A. Egorov

Department of Chemistry, University of Virginia, Charlottesville, VA 22901, USA

Stefan Fossati

Biosensor Technologies, AIT - Austrian Institute of Technology GmbH, Muthgasse 11, Vienna 1190, Austria

Emily Fullwood

Department of Chemistry, University of Utah, Salt Lake City, UT 84112, USA

Casey J. Galvin

Department of Chemical & Biomolecular Engineering, NC State University, Raleigh, NC 27695-7905, USA

Julien E. Gautrot

Institute of Bioengineering, School of Engineering and Materials Science, Queen Mary, University of London, Mile End Road, London, E1 4NS, UK

Jan Genzer

Department of Chemical & Biomolecular Engineering, NC State University, Raleigh, NC 27695-7905, USA

Juan M. Giussi

Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Universidad Nacional de La Plata, CONICET, CC. 16 Suc. 4, 1900 La Plata, Argentina

Karine Glinel

Université catholique de Louvain, Institute of Condensed Matter and Nanoscience, Bio & Soft Matter, Louvain-la-Neuve, Belgium

Erica Green

Department of Chemistry, University of Utah, Salt Lake City, UT 84112, USA

Renpeng Gu

Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC 27708, USA

Solmaz Hajizadeh

Division of Pure and Applied Biochemistry, Department of Chemistry, Lund University, Sweden

Yuuki Inoue

Department of Materials Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan

Kazuhiko Ishihara

Department of Materials Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan

Lei Jiang

CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, CAS Center for Excellence in Nanoscience Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, People's Republic of China

Alain M. Jonas

Université catholique de Louvain, Institute of Condensed Matter and Nanoscience, Bio & Soft Matter, Louvain-la-Neuve, Belgium

En-Tang Kang

Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore 117585, Singapore

Amir Khabibullin

Department of Chemistry, Carnegie Mellon University, 4400 Fifth Avenue, Pittsburgh, PA 15213, USA

Jayachandran N. Kizhakkedathu

Centre for Blood Research and Department of Pathology & Laboratory Medicine, Department of Chemistry, University of British Columbia, Vancouver, BC V6T 1Z3, Canada

Wolfgang Knoll

Biosensor Technologies, AIT - Austrian Institute of Technology GmbH, Muthgasse 11, Vienna 1190, Austria

Ursula Koniges

New York University Tandon School of Engineering, Brooklyn, NY 11201, USA

F. A. M. Leermakers

Physical Chemistry and Soft Matter, Wageningen University, Wageningen, 6703 HB, The Netherlands

Rastislav Levicky

New York University Tandon School of Engineering, Brooklyn, NY 11201, USA

Bin Li

State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, People's Republic of China

Danyang Li

Institute of Bioengineering, School of Engineering and Materials Science, Queen Mary, University of London, Mile End Road, London, E1 4NS, UK

Hongliang Liu

CAS Key Laboratory of Bio-inspired Materials and Interfacial Science, CAS Center for Excellence in Nanoscience Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, People's Republic of China

Waldemar A. Marmisollé

Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Universidad Nacional de La Plata, CONICET, CC. 16 Suc. 4, 1900 La Plata, Argentina

Bo Mattiasson

Indienz AB, Annebergs Gård, Billeberga, Sweden

Division of Biotechnology, Department of Chemistry, Lund University, 221 00 Lund Sweden

Krzysztof Matyjaszewski

Department of Chemistry, Carnegie Mellon University, 4400 Fifth Avenue, Pittsburgh, PA 15213, USA

A. Milchev

Institute of Physical Chemistry, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria

Kenichi Nagase

Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University (TWIns), 8-1 Kawadacho, Shinjuku, Tokyo 162-8666, Japan

Rikkert J. Nap

Department of Biomedical Engineering, Department of Chemistry, and Chemistry of Life Processes Institute, Northwestern University, 2145 Sheridan Road Evanston, IL 60208-3100, USA

Koon-Gee Neoh

Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore 117585, Singapore

Teruo Okano

Institute of Advanced Biomedical Engineering and Science, Tokyo Women's Medical University (TWIns), 8-1 Kawadacho, Shinjuku, Tokyo 162-8666, Japan

Joanna Pietrasik

Institute of Polymer and Dye Technology, Lodz University of Technology, Stefanowskiego 12/16, 90-924 Lodz, Poland

Dicky Pranantyo

Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore 117585, Singapore

Nestor Gisbert Quilis

Biosensor Technologies, AIT - Austrian Institute of Technology GmbH, Muthgasse 11, Vienna 1190, Austria

Madeleine Ramstedt

Department of Chemistry, Umeå University, 901 87 Umeå, Sweden

Chun-lai Ren

National Laboratory of Solid State Microstructures and Department of Physics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093, People's Republic of China

Sade Ruffin

New York University Tandon School of Engineering, Brooklyn, NY 11201, USA

Sho Sakata

Department of Materials Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan

Julieann Selden

Department Chemistry, University of Utah, Salt Lake City, UT 84112, USA

Nityanand Sharma

Biosensor Technologies, AIT - Austrian Institute of Technology GmbH, Muthgasse 11, Vienna 1190, Austria

Estefania Gonzalez Solveyra

Department of Biomedical Engineering, Department of Chemistry, and Chemistry of Life Processes Institute, Northwestern University, 2145 Sheridan...